Install Free McBoot from a CD
Written by JNABK
You need:
CDGenPS2
Free McBoot package
A blank CDR and a burner
A method to boot the CD

Creating the CD:
Extract the folder  from the CDGenPS2v3.rar and  place it  on your desktop {or any place you  can find it easily}. Extract the folder INSTALL and the FREE_MCBOOT.ELF into the CDGenPS2v3 folder.
NOTE: Please read the User Guide and prepare your installation files before continuing on with the CD compilation, its important to do this FIRST !
If using the Noobie package, all files are already prepared for installing.

1-First we need to create a  .CNF  using Notepad. Open a new text document and copy/paste the following into it, making sure to copy the empty space of line 4 too.
BOOT2 = cdrom0:\FREE_MCBOOT.ELF;1
VER = 1.00
VMODE = NTSC/PAL

Name this  SYSTEM.CNF and select  All files from Save as type: and save it in the CDGenPS2v3 folder .


2-Next open CDGenPS2 and drag the SYSTEM.CNF into the main window.
  
Right-click on the SYSTEM.CNF file in CDGenPS2 and select Edit

      
Click on Fix LBA checkbox to put a check in it , then enter 12231 in the LBA textbox and click OK.  { You wont need Dummy files with a fixed LBA}


3-Drag the FREE_MCBOOT.ELF file into  CDGenPS2.
Then the folder INSTALL {Read the Install Guide to place files into the INSTALL folder first, if not using the Noobie Package.}
You can click on the VOL button and change the name to FMCB Installer for future indentification of the disc, but this is optional  and  not required.
Click on the IMG button from the left window and in the popup window give it a file name. Select the CDGenPS2v3 folder as the save location and  choose the image file format  .ISO or .BIN, then press the Save button.



You can close CDGenPS2 now we are done with it.
Burning your CD
There are lots of burning apps that support both ISO and BIN extensions, so open your burn app and  select the file you just made and burn it to a blank CDR.
Just change the Write Speed to the middle setting of your burner app to ensure a good burn.
If you dont have a burning app or never used it before, then heres a guide with a free burner you can use:  BurnatOnce

Now all you have to do now is get the disc to boot on the PS2, but you need a method to boot the disc since an unmodified PS2 will NOT boot this disc.
Booting a burned disc

Sony  designed the console so it would not boot a  burned disc as a preventive measure against piracy. But there are methods to use that will allow a burned disc to run on the console.

Modchips
SwapMagic retail discs
A  Memory Card Exploit thats has Cogswap
Cheat discs such as AR Max or CodeBreaker
A friend with any of the above

This tutorial assumes you have one of these methods available, if not you must research the best method for you to use.

This tutorial was written using the following methods.

Created CD and saved as .iso format to use with UltraISO as my burn app. Burned with UltraISO to a CD-R TDK 700MB disc.
 Booted the disc with a CC 2.0 SLE on a NTSC V9 console. Installed Free McBoot on a Sony 8MB memory card {black one}.

Tested the MC with an unmodded console {NTSC V4} and Free McBoot ran just fine.
Its not recommended to use Free McBoot with a Modchip, unless you know it can be disabled 100%. The CC 2.0 SLE doesnt fully disable and will result in a screen , saying "No Menu" if you attempt to use Free McBoot .